Alvis Construction Group has specialized in commercial roof restoration and replacement since 1957. A coating system can protect a sound roof, reduce disruption to occupied buildings, and come with a manufacturer-backed warranty.
Depending on the condition of your roof and the type of roofing system, a coating application can extend the life of the roof and protect it from the elements. When a roof is at the end of its service life, we also handle full commercial replacements.
| Consideration | Roof coating / restoration | Full roof replacement |
|---|---|---|
| Best when | The existing roof is structurally sound and a good candidate for restoration. | The system is too deteriorated, wet, or otherwise past restoring. |
| Cost | Typically a lower investment than a complete tear-off and reroof. | A larger capital project, including removal and disposal of the old system. |
| Occupied buildings | Work stays on the roof and is planned to keep disruption to a minimum. | More activity on site; still managed carefully on occupied facilities. |
| Schedule | Often faster, because the existing roof stays in place. | Longer, because the old system must be removed and replaced. |
| Waste | Avoids sending a full roof assembly to the landfill. | Tear-off generates substantial construction waste. |
| Warranty | 10, 15, or 20-year manufacturer labor and material warranties, when the roof qualifies. | New-system warranties are available depending on the specified assembly. |
A free roof assessment is the starting point. We inspect the roof and recommend coating, targeted repairs, or replacement — not a one-size-fits-all pitch.
Roof coating and restoration is our specialty. We work on occupied commercial and industrial facilities and can address projects of any size.
A coating application selected for the condition and type of your roof, designed to extend service life and protect the system from external elements.
Long-standing relationships with roofing manufacturers allow us to provide 10, 15, or 20-year labor and material warranties. Covered repairs during the warranty term are at no cost to you.
When a roof is not a candidate for restoration, we replace it. Commercial and industrial projects have been a specialty for decades, including work on occupied facilities.
Primarily commercial new construction, with residential opportunities as well. Quality materials, efficient project management, and a commitment to client satisfaction.
Every roof is different. The sequence below is the typical path we follow so the finished system can perform and, when it qualifies, carry a manufacturer warranty.
We assess the existing roof, identify wet or damaged areas, and confirm whether the system is a candidate for coating or is better served by replacement.
The surface is cleaned so the coating can bond. Dirt, chalking, and loose material are removed before any product goes down.
Seams, flashings, penetrations, and other defects are repaired so the roof is sound before it is coated.
Where the system and manufacturer require it, a primer is applied to promote adhesion to the existing membrane or metal.
The specified coating — such as silicone or acrylic — is applied at the coverage rate required for the system and the warranty being sought.
On qualifying projects, we close out with a 10, 15, or 20-year manufacturer labor and material warranty that covers repairs for the life of the warranty.
We specify a coating based on the existing system, drainage, exposure, and warranty requirements. These are the types most often used on commercial and industrial roofs.
Widely used on low-slope commercial roofs. Silicone holds up well under UV exposure and is often chosen where ponding water is a concern. It is a common option for restoration of single ply and other membranes.
Water-based, reflective coatings that can help reduce heat load on the roof surface. Acrylics generally perform best on roofs with positive drainage, where standing water is limited.
Urethane and other elastomeric coatings may be specified for high-traffic areas, particular substrates, or a manufacturer’s warranted assembly. The inspection tells us which path fits.
Alvis Construction Group is certified in Tremco, Progressive Materials, GAF, and American WeatherStar. Those relationships support the 10, 15, and 20-year labor and material warranties we can offer on qualifying roofs.
With over 50 years of qualified experience, Alvis Construction Group is built around long-term partnerships — not a one-and-done job. We stay with you through the entire process and work to complete every job on time and on budget.
We are fully licensed, insured, and bonded, with a trained in-house staff. Safety is a top priority: ongoing training, best practices, and strict safety guidelines.
Over 20 years of experience in the commercial roofing industry. Jason directs strategic initiatives with a strong emphasis on manufacturer and customer relationships.
A silicone roof restoration over existing modified bitumen and TPO roof sections, with a 20-year Progressive Materials silicone system. The work included new walkways and drain detailing, and was completed in November 2026.
Photos below are from the finished roof. They are shown in tiles at their native size so the images are not stretched.
If you want to join a commercial roof coating and restoration crew, fill out the application below. It goes straight to our office. The roles below are general examples, not a list of current openings.
Field work on commercial and industrial coating and restoration projects.
Apply NowLead work on a coating crew and help keep the job moving safely and on schedule.
Apply NowPrefer email? Send your resume to office@alvisconstructiongroup.com.
Straightforward answers about commercial roof coating and restoration. If your question is not listed, call or request an assessment.
A roof coating is a fluid-applied membrane installed over an existing, sound roof. After cleaning and repairs, the coating creates a protective, often reflective surface that helps extend the life of the roof and can qualify for a manufacturer warranty.
When the existing roof is structurally sound and a good candidate for coating, restoration is typically a lower investment, faster, and less disruptive than a full tear-off — especially on occupied buildings. If the roof is too deteriorated, we will recommend replacement instead.
We work with single ply, modified bitumen, built-up, and standing seam metal roof systems. The inspection determines whether a particular roof can be coated and which coating is appropriate.
On qualifying projects we can provide 10, 15, or 20-year manufacturer labor and material warranties. Those warranties protect the roof from covered repairs for the entire warranty term, with no money out of your pocket for those repairs.
Yes. Commercial and industrial projects on occupied facilities have been a specialty for decades. We work as efficiently as possible to minimize disruptions and complete the job in a timely manner.
Use the form below or call 941-270-6544. Tell us about the property and the roof, and we will follow up to schedule an inspection.
Tell us about your commercial or industrial roof and we will be in touch.