Licensed · Insured · Bonded — CGC1512080 · CCC1328929 · CFC1427424 941-270-6544 · alvisgroup@alvisconstructiongroup.com
Roof coating & restoration

Protect a sound commercial roof instead of tearing it off.

Roof coating and restorations are our specialty. The right system depends on the condition of your roof and the type of roofing assembly already in place.

The process

From inspection to a manufacturer warranty.

This is the typical sequence on a coating project. The inspection is what tells us whether coating is the right path, or whether the roof should be replaced.

1

Inspection

We evaluate the existing roof, look for wet or damaged areas, and confirm it is a candidate for restoration.

2

Cleaning

The surface is cleaned so the new coating can bond. Dirt, chalking, and loose material are removed first.

3

Repairs

Seams, flashings, penetrations, and other defects are repaired so the roof is sound before coating begins.

4

Primer

Where the system and manufacturer require it, primer is applied to promote adhesion to the existing membrane or metal.

5

Coating

The specified coating is applied at the coverage rate required for the system and the warranty being sought.

6

Warranty

On qualifying projects, a 10, 15, or 20-year manufacturer labor and material warranty is issued.

Coating types

Silicone, acrylic, and other elastomeric systems.

We do not start with a single product. The chemistry is chosen for the substrate, drainage, climate exposure, and the warranty the project is aiming for.

Silicone

A frequent choice on low-slope commercial roofs. Silicone is UV stable and is often selected where ponding water is a concern. It is commonly used to restore single ply and other membranes.

Acrylic

Water-based, reflective coatings that can help reduce heat on the roof surface. Acrylics generally perform best where the roof has positive drainage and limited standing water.

Other elastomeric systems

Urethane and other elastomeric coatings may be specified for high-traffic areas, particular substrates, or a manufacturer’s warranted assembly. The inspection determines the fit.

Roof systems

We coat the major commercial roof types.

Alvis can provide coating and restoration services across these assemblies, provided the roof is a candidate after inspection:

Single Ply Modified Bitumen Built-Up Standing Seam Metal

Warranties

Because of long-term relationships with roofing manufacturers, we can provide 10, 15, or 20-year labor and material warranties on qualifying coated roofs. Covered repairs during the warranty term are at no cost to you.

We are certified in Tremco, Progressive Materials, GAF, and American WeatherStar.

Request a Free Assessment